- The electromagnetic valve
- Electronic descaler
- Needle valve
- Pressure reducing valve
- Ball valve
- Stainless steel valve
- Drain valve
- Knife gate valve
- Forged steel valve
- Plunger valve
- Butterfly valve
- Diaphragm valve
- Rubber lined valve
- Fluorine lined valve
- Slurry valve
- Hydraulic control valve
- Flame arrester
- Breathing valve
- Steam trap
- Shut-off valve
- Check valve
- Oxygen valve
- Ammonia valve
- Drain valve
- Balancing valve
- Control valve
- Safety valve
- Pinch valve
- Pneumatic valves
- Vacuum valve
Pneumatic angle seat valve
- Y615W气动角座阀 Category: Y615W pneumatic angle seat valve
- ￥ 面议 Price: ￥ Negotiable
I. Overview of Y615W pneumatic angle seat valve:
Pressure range: 1.6MPa
Medium temperature: -10 ℃ ～ ＋ 180 ℃
Ambient temperature: -10 ℃ ～ ＋ 60 ℃
Body material: Stainless steel Seal material: Teflon actuator Housing: Polyamide Control medium: Neutral gas, air
Second, Y615W pneumatic angle seat valve features:
1. Visual position indication: can be connected to limit switch or emergency manual device.
2. Easy installation: The air control head can be rotated 360 ', and even the limit switch can be rotated 360'. One or two limit switches can be easily installed.
3. Advanced pneumatic controller: thick engineering plastic shell, safe and reliable. Low wear piston structure, large capacity and low air consumption. Internal components are self-lubricating and maintenance-free.
4, with a variety of control methods: normally open, normally closed, double action.
5. Smaller pneumatic actuators are required: when fluid flows from above the valve stem, the head is made.
6, easy to connect: MAMUR standard connection, embedded metal connector. Optional smaller control head.
7. Long-life guide rod: Stem shaped Teflon (PTEE) seal to avoid the introduction of dirt. Self-lubricating and maintenance-free. The stem is specially treated to ensure optimal fixation and to automatically correct the position.
8. No water hammer action: When the fluid flows from below the valve stem, the water hammer (water impact force) is absorbed.
9, advanced valve body mechanism: the flow rate is 30% larger than the ordinary angle seat, the volume is smaller, and the fluid flow is better. Stainless steel 316 valve body, Teflon sealed, high temperature resistance and corrosion resistance. Lifespan up to seven million times
Structure chart of Y615W pneumatic angle seat valve:
Performance parameters of Y615W pneumatic angle seat valve:
Interface C. ￠ D
Inner hole (mm
Actuator size (mm
A / F
G1 / 2
G3 / 4
G11 / 4
G11 / 2
G2-1 / 2
Five, Y615W pneumatic angle seat valve ordering matters needing attention:
1.Y615W pneumatic angle seat valve product name
2.Y615W pneumatic angle seat valve product model
3.Nominal pressure of Y615W pneumatic angle seat valve
4.Y615W pneumatic angle seat valve operating temperature
5.Nominal diameter of Y615W pneumatic angle seat valve
6.Y615W pneumatic angle seat valve connection
7.Y615W pneumatic angle seat valve product material
Y615W pneumatic angle seat valve is widely used in food and chemical processes, sterilizers, autoclaves, dry cleaners, clothes dryers, beer production lines, etc.