一定牛彩票网

Product Catalog PROUCTS CATALOG
Related 一定牛彩票网
Related articles

Location: 一定牛彩票网 > Products > Solenoid Valves > ZBSF Type Full Stainless Steel Solenoid Valve

Products

Acid and alkali resistant stainless steel solenoid valve

  • ZBSF Type: ZBSF
  • ZBSF型全不锈钢电磁阀 Category: ZBSF Type Full Stainless Steel Solenoid Valve
  • 面议 Price:Negotiable
  • 温州 Origin: Wenzhou

The latest quotation of solenoid valve. Loudi stainless steel solenoid valve. Yongjia Yingke solenoid valve manufacturer ZBSF acid and alkali resistant stainless steel solenoid valve is installed with the solenoid coil up and kept in a vertical position. The arrow or mark on the solenoid valve should be consistent with the flow direction of the pipeline. Install in a place where there is splashing or leaking water.

share to:

ZBSF acid and alkali resistant stainless steel solenoid valve principle

This valve is a step-by-step direct-closing normally closed solenoid valve. After the coil is energized, the armature first drives the small valve to open, and the large valve opens under the effect of the formed medium pressure difference and electromagnetic force. The coil is powered off, the armature parts are reset, and the small and large valves are opened. Close tightly with the media pressure surface.
Normally open solenoid valve. After the coil is energized, the armature moves down under the action of magnetic force, pushing the valve plug of the auxiliary valve down until it is tightly pressed with the auxiliary valve seat, and the auxiliary valve is closed. The valve cup is tightly closed by magnetic force and self-weight, and the valve is closed. The coil is de-energized, the magnetic force is zero, the armature and the valve plug of the auxiliary valve rise by the action of the spring, the auxiliary valve opens, and the medium in the main valve valve cup flows away through the auxiliary valve. The pressure drops, and the main valve cup rises from the lower pressure difference The main valve opens and the valve opens.

ZBSF acid and alkali resistant stainless steel solenoid valve size

DN

Inch

L

H

D

D1

D2

b

f

nd

ZBSF- 15 F

1/2

115

148

Φ95

Φ65

Φ46

14

2

4-Φ14

ZBSF- 20 F

3/4

115

148

Φ105

Φ75

Φ56

16

2

4-Φ14

ZBSF- 25 F

1

125

148

Φ115

Φ85

Φ65

16

3

4-Φ14

ZBSF- 32 F

1 1/4

150

182

Φ140

Φ100

Φ76

18

3

4-Φ18

ZBSF- 40 F

1 1/2

165

182

Φ150

Φ110

Φ84

18

3

4-Φ18

ZBSF- 50 F

2

190

192

Φ160

Φ125

Φ99

20

3

4-Φ18

ZBSF- 65 F

2 1/2

2 5 0

265

Φ185

Φ145

Φ118

20

3

8-Φ18

ZBSF- 80 F

3

27 0

276

Φ200

Φ160

Φ132

20

3

8-Φ18

ZBSF- 100 F

4

3 2 0

373

Φ220

Φ185

Φ156

twenty two

3

8-Φ18

ZBSF- 125 F

5

400

416

Φ250

Φ210

Φ184

twenty two

3

8-Φ18

ZBSF- 150 F

6

480

440

Φ285

Φ240

Φ211

twenty four

3

8-Φ22

zbsf acid and alkali resistant stainless steel solenoid valve installation

1. It is recommended that the use unit assign a special person to be responsible for the use and maintenance of zbsf acid and alkali resistant stainless steel solenoid valves.
2. After the solenoid valve is installed, the medium must be tested for several times, and it can be put into official use only after confirming that it is normal.
3. The dirt inside and outside the large valve and the armature suction surface should be cleaned regularly. Be careful not to damage the sealing surface.
4. When the zbsf acid and alkali resistant stainless steel solenoid valve is not used for a long time, the manual valve in front of the valve should be closed. When it is re-enabled, the steam solenoid valve should drain the condensate and perform several trial operations. It can be put into use after the switch is normal .
5. When the solenoid valve is removed from the pipeline and not used, the internal parts should be cleaned and blown with compressed air for storage.
6. When using for a long time, if the seal between the piston and the valve seat is not good, the piston sealing surface can be ground again, and then the valve seat can be ground.
7. When working, pay attention to the pressure gauges on the front and back of the valve. The working pressure must not exceed the rated pressure, and the working pressure difference must be within the rated pressure difference range. When the working pressure exceeds the rated pressure or the working pressure difference exceeds the rated pressure difference, the solenoid valve should be stopped and the front and rear manual valves should be closed to prevent the solenoid valve from exploding and leaking.

When ZBSF acid and alkali resistant stainless steel solenoid valve is installed, the solenoid valve coil is up and kept in a vertical position. The arrow or mark on the solenoid valve should be consistent with the flow direction of the pipeline. It should not be installed in places with water splashing or leaking.

Yongjia Yingke Pump Valve Co., Ltd. specializes in providing acid and alkali resistant stainless steel solenoid valves and other product information. Welcome to inquire!
All rights reserved Address: No. 28 Heng Street, Mabei Industrial Zone, Oubei Town, Yongjia County
Fax: 0577-67023752 Zip code: 325105 E-mail: yroke@126.com
Record number: Zhejiang ICP No. 09084562-4 Management background Technical support: Environmental Protection Online

Manager Ye
0577-67370263 67928052
点击这里给我发消息

Zhejiang Public Network Security No. 33032402001564