- The electromagnetic valve
- Electronic descaler
- Needle valve
- Pressure reducing valve
- Ball valve
- Stainless steel valve
- Drain valve
- Knife gate valve
- Forged steel valve
- Plunger valve
- Butterfly valve
- Diaphragm valve
- Rubber lined valve
- Fluorine lined valve
- Slurry valve
- Hydraulic control valve
- Flame arrester
- Breathing valve
- Steam trap
- Shut-off valve
- Check valve
- Oxygen valve
- Ammonia valve
- Drain valve
- Balancing valve
- Control valve
- Safety valve
- Pinch valve
- Pneumatic valves
- Vacuum valve
Location: 一定牛彩票网 > Products > Drain Valve > J744X / J644X Hydraulic and Pneumatic Angle Quick-Open Sludge Valve > J744X / J644X Hydraulic and Pneumatic Angle Quick-Open Sludge ValveProducts
J744X / J644X Hydraulic and Pneumatic Angle Quick-Opening Mud Drain Valve
- 永嘉英科J744X液压角式快开排泥阀生产厂家.J644X气动角式快开排泥阀温州生产基地 Model No .: Yongjia Inco J744X hydraulic angle type quick opening mud valve manufacturer. J644X pneumatic angle type quick opening mud valve Wenzhou production base
- J744X/J644X液压、气动角式快开排泥阀 Category: J744X / J644X Hydraulic and Pneumatic Angle Quick-Opening Mud Drain Valve
- ￥ 面议 Price: ￥ Negotiable
The piston seal of the hydraulic cylinder of J644X / J744X hydraulic and pneumatic angle quick-release mud valve is an L-shaped bowl, which has good sealing performance and is durable. The valve disc and the valve seat are soft-sealed, and have a close packing performance without leakage. It adopts electric two-position four-way reversing valve or manual two-position four-way reversing valve for centralized control, which is easy to operate.
First, J644X / J744X hydraulic, pneumatic angle type quick-opening mud discharge valve uses:
It is installed outside the bottom wall of various sedimentation tanks to remove sediment and dirt at the bottom of the tanks.
Principle and performance of J644X / J744X hydraulic and pneumatic angle quick-opening mud discharge valve:
This product is a combination of a hydraulic cylinder and an angle-type shut-off valve. The power band or disc in the hydraulic cylinder is raised and lowered to open or close the valve body channel to achieve fluid flow.
The piston seal of the hydraulic cylinder is an L-shaped leather bowl, which has good sealing performance and is durable. The valve disc and the valve seat are soft-sealed, and have a close packing performance without leakage. It adopts electric two-position four-way reversing valve or manual two-position four-way reversing valve for centralized control, which is easy to operate.
Technical parameters of J644X / J744X hydraulic and pneumatic angle quick-opening mud discharge valve :
1. Nominal pressure: 1.0MPa
2. Working medium of hydraulic cylinder: water, gas
3. Working pressure of hydraulic cylinder: O.15-1.0MPa
4. Medium temperature: O-80 ℃
Fifth, hydraulic, pneumatic angle type quick-opening mud valve main parts material:
Moon body, moon cover
Diaphragm pressure plate, valve disc
Cast iron, ductile iron, carbon steel
Ductile iron, bronze
Nylon reinforced rubber
Dimensions of hydraulic and pneumatic angle quick-opening mud discharge valve :
Seven, J744X / J644X hydraulic, pneumatic angle type quick opening mud discharge valve ordering instructions:
⑦使用温度⑧是否带附件以便我们为您正确选型。 1. ① Product name and model ② Nominal diameter ③ Valve body material ④ Nominal pressure ⑤ Use medium ⑥ Connection method ⑦ Use temperature ⑧ Are there accessories so that we can choose the correct type for you.
2.If you have special requirements, please indicate when ordering the product
3. If the model has been selected by the design unit, please order directly from our sales department according to the model.
, 请您尽量提供设计图。 4. When the occasion of use is very important or the environment is more complicated , please provide design drawings as much as possible.
http://zfwsp.com 】,如有任何疑问.您可以致电给我们,我们一定会尽心尽力为您提供优质的服务。 You are welcome to visit our website [ http://zfwsp.com ]. If you have any questions, you can call us and we will do our best to provide you with quality services.
Hydraulic and pneumatic angle type quick-opening mud discharge valve is an angle cut-off valve with hydraulic source or pneumatic source as the actuator. They are usually installed in rows on the outer wall of the bottom of the sedimentation tank to remove sediment and dirt from the bottom of the tank. The piston of the valve hydraulic cylinder is an L-shaped leather bowl, which has good sealing performance and durability, and the valve sealing pair is also a rubber seal without leakage. Remote control can also be achieved through electric two-position four-way reversing solenoid valves. Easy to operate, safe and reliable. Hydraulic angle type quick open mud discharge valve, pneumatic angle type quick open mud discharge valve, angle type quick open mud discharge valve.Sales Tel: 0577-67370263 / 67499728
QQ: 178041624, 821449119
[Please customers before order or purchase]
[Please communicate with our salesperson or call us through Tradelink]
(1) Price: The price is subject to the actual price quoted by our company!
(2) Product problems: All products of our company undergo strict quality inspection before delivery to ensure that there are no problems before delivery!
(3) Product pictures: All pictures are taken in kind, but there will be slight color differences due to light and display. Please understand. (4) Product attributes: Please consult the product model and size before ordering or purchasing. Wait to confirm whether the product you bought and the size of the product you need