- The electromagnetic valve
- Electronic descaler
- Needle valve
- Pressure reducing valve
- Ball valve
- Stainless steel valve
- Drain valve
- Knife gate valve
- Forged steel valve
- Plunger valve
- Butterfly valve
- Diaphragm valve
- Rubber lined valve
- Fluorine lined valve
- Slurry valve
- Hydraulic control valve
- Flame arrester
- Breathing valve
- Steam trap
- Shut-off valve
- Check valve
- Oxygen valve
- Ammonia valve
- Drain valve
- Balancing valve
- Control valve
- Safety valve
- Pinch valve
- Pneumatic valves
- Vacuum valve
BUJ41S insulated plunger globe valve
- BUJ41S保温柱塞截止阀 Category: BUJ41S insulated plunger globe valve
- ￥ 面议 Price: ￥ Negotiable
Product features of BUJ41S insulated plunger globe valve :
1. The structure of this lift-rod piston valve is simple, scientific, safe and reliable. It is particularly easy and flexible to open and close. Compared with the plunger valve, it has the advantages of light and fast opening and closing.
2. Unique sealing performance and no leakage. The piston has a dual-effect function composed of a metal and non-metal multilayer sealing structure.
3. One-piece valve seat (cylinder liner) radial conical sealing surface, high height, large contact area and good performance.
4. The selection of materials for piston rings according to different applicable media can comprehensively increase its range of use, high temperature resistance, wear resistance, corrosion resistance, strong resilience, etc. After a long period of use, the piston rings can be adjusted for pressure if they are worn and maintained. Increase the original state.
5. The technology of repairing and replacing the piston ring is simple and convenient. The valve body does not need to be detached from the pipeline. The valve cover assembly can be replaced after a steam outage, and the new piston ring can be replaced and used repeatedly.
Performance and principle of BUJ41S insulated plunger globe valve :
1.Insulation plunger stop valve consists of valve body, valve cover, gland, stem, valve plug, valve cover, piston ring, integrated cylinder liner (valve seat) lift rod nut, flat bearing, hand wheel, bevel gear, etc. The components are composed, and the wheel rotates and lifts the rod to drive the piston to reciprocate up and down between the inside and outside of the conical cylinder liner to complete its closing and opening.
2. The cylinder cone structure is tapered in the cylinder (valve seat) cone circular shape according to the applicable medium. Stainless steel or hard alloy is deposited and welded to a hardness of HRC40.
3. The sealing structure of the valve plug and piston ring has a multi-layer seal made of metal and non-metal. When a piston ring is worn out for a long time, the pressure has been adjusted to zero, and the pressure regulation has failed, so the second The metal cut-off conical piston plays the role of simultaneous sealing. Therefore, the service life of the piston valve is several times that of ordinary valves, so no special maintenance is required during use to keep it from leaking. The selection of a better opening and closing device without leaking pipes has obvious applications for saving energy, reducing labor and environmental pollution.
Three, BUJ41S insulation plunger globe valve material:
The way to
PN (MPa) Test pressure PN (MPa)
Main technical performance
Valve material selection
grey cast iron
Performance specifications of BUJ41S insulated plunger globe valve :
ps(MPa) Test pressure ps (MPa)
℃ 180-320 ℃
Water, steam, gas, oil and other weakly corrosive media
℃ 150-200 ℃
Nitrate, acetic acid
Five, BUJ41S insulation plunger globe valve connection size:
PN(MPa) Weighing pressure PN (MPa)
(mm) Size (mm)
Ordering instructions for BUJ41S insulated plunger globe valve :
、①产品名称与型号②公称直径③ 阀体材质 ④公称压力⑤使用介质⑥使用温度⑦连接方式⑧是否带附件以便我们的为您正确选型。 1. ① Product name and model ② Nominal diameter ③ Valve body material ④ Nominal pressure ⑤ Use medium ⑥ Use temperature ⑦ Connection method ⑧ Whether there are accessories for our correct selection for you
、如有特殊要求时请在订购产品时注明 2.If there are special requirements, please indicate when ordering the product
、若已经由设计单位选定的型号，请按型号直接向我司销售部订购。 3. If the model has been selected by the design unit, please order directly from our sales department according to the model.
、当使用的场合非常重要或环境比较复杂时 , 请您尽量提供设计图。 4. When the use occasion is very important or the environment is more complicated , please provide design drawings as much as possible.
Welcome to visit our website [ http://zfwsp.com ]. If you have any questions, you can call us and we will do our best to provide you with quality services. Phone: 0577-67370263